GOVERNMENT-45(GM2)

	It is a fire ring pin hall judging from muzzle side. Nowadays, model guns of center fire type is popular among the people, personally, I had a little but negative impression and skeptical, when it was first released.
		This is inside part of a fire ring pin. A fire ring pin is different from a current center fire model, and it is a board-shaped metal press product.

A slide is such a form. Now an extracter is different from a released thing, and I am free without entering, and a spring moves with a screw stopper. When I fired with the plastic cartridge, the gun discharged the cartridge without fail. However, it became tainted by a few times of firing. Moreover the rim of the cartridge was chipped off when it had jamming up, I found it does not last long as the metal made cartridge. I do eject without a problem with a metal cart.

Same as GM1.The structure is making down the hummer by rotating sear with trigger bar, and no disconnector. A correction / postscript　 There is disconnector for a part, but does not attend forth. disconnector is moved to a hammer. When a hammer is downed, and disconnector is moved, and connection of triggerbar and sear is excluded.

It is ricoil spring hanging over barrel. And it is extractor of press working product set in a barrel basal part. Because barrel is rigid, only the hole where slide stop is in opens. And on earth plug and barrelbushing are made, and it is stopped with a screw from the slide rear. Therefore, a resolution procedure is an original thing, too. ricoil spring was cut, but has cut it when I schemed to be able to use CAP. Originally it supposed to have 2 turn. A correction / postscript　 The buffer rubber which there was about a part under a barrel with old barrel is missing.

	It is printed with "CAL.45 MG BLK" to this barrel. In fact, this barrel is the second. It is the thing which it purchased with detonator to change it in CAP specifications when CAP was developed. Originally it was a color of black ABS.(Now I am missing.I cannot throw it away.)
I do not understand a reason, but This barrel is inside diameter narrows. The silencer bellow was bit bigger to fit in the cap, so I had to reduce the size of the cap slightly.

It is detonator. A thing of the upper part is the thing which was on at the age of paper CAP. I sharpened tip part to become CP, but tip part became it in the shape of a bell formerly. A thing of bottom is a thing for CAP open. I described it some time ago, but purchased it CAP was released, and to change it in CAP specifications.Unfortunately I was not able to let you operate well. And I touched it until recently and looked.

Through my experience to communicate with the people in internet, I made a decision to modify my gun to CP model to make it to not be outdated. Then I shifted it to CP model. As the paper made cap is no longer used, I tried conversion　to use the detonator for this to use for the new(CP) model , then I face the similar problem. The detonator for the paper cap is not was not fit in for the barrel for this cap. I don’t know why, the one for paper cap has the diameter of 6mm, but the other has it of 5.5mm. Oh, because it was 0.5mm, I sharpened it by a drill and a rasp. Thanks to your support my gun works as CP model, but I wonder how long it will survive. It is strong and feels fear of damage in CP of a HW type.

It is a frame for the thing which it changed besides barrel relation. I replaced the frame as the portion around the pinhole had broken, and also by unknown reason the pinhole had been a bit small to put the pin, I had widen it by sandpaper. Was that damage so big?? lThe lanyard ring portion covered with scratches, as I hit and scratched it many times. Because it is come in, I get it.

When I try to look in a scope.

Silencer and Scope, Scope mount were released whether influence of old TV program "Napoleon solo" was left. I think silencers and Scopes for this model are sold as compatible with other models, but this is not certain. A scope mount is for exclusive use. A lens is in Scope, but it is no magnification or a state such as reverse magnification. As for the silencer, a sound does not go out! This is so-called a paper tiger, a sort of thing appeared in the old spy movies.

Silencer / Scope / Scope mount.

	I become considerable weight when I put all on. Balance does not turn be the grip top,But when a silencer sticks, the front desk becomes heavy.